Hi Monte,

I have a few comments for what it is worth.  Be sure your string is  wound in the right direction. Be sure you have 2 separate sets of string.  I think the green round .80 works better in self feeding than the  square or triangular. I  bought 2 new spools from the B & D location. They worked better than the old spools. Not sure why. . An option is  if it is under the 2 years warranty   take it in to your B & D location and tell them the no bump feeding is not working.  If I did that here they would just give me a brand new one. Their replacement warranty is the best in the business. I love that Grasshog  GH1000  It is so powerfull. Brian Nelson  713-467-3025.

A compact fluorescent lamp (CFL), also known as a compact fluorescent light bulb is a type of fluorescent lamp designed to replace an incandescent lamp. Many CFLs can fit in the existing incandescent light fixtures.

Compared to incandescent lamps of the same luminous flux, CFLs use less energy and have a longer rated life. In the United States, a CFL can save over US$30 in electricity costs over the lamp’s lifetime compared to an incandescent lamp and save 2000 times their own weight in greenhouse gases^[2]. The purchase price of a CFL is higher than that of an incandescent lamp of the same luminous output, but this cost is recovered in energy savings.

CFLs radiate a different light spectrum from that of incandescent lamps^[3]. Improved phosphor formulations have improved the subjective color of the light emitted by CFLs such that the best 'soft white' CFLs available in 2007 are subjectively similar in color to standard incandescent lamps.^[4]

 History

The compact fluorescent lamp was invented by Ed Hammer, an engineer with General Electric in response to the 1973 oil crisis. While it met its design goals, it would have cost GE about $25M to build new factories to produce them and the invention was shelved.^[5] However, the design leaked out and was copied by others^{[citation needed]}.

  Market

Globally introduced in the early 1980s, CFLs have steadily increased in sales volume. The most important advance in fluorescent lamp technology (including CFLs) has been the gradual replacement of magnetic ballasts with electronic ballasts; this has removed most of the flickering and slow starting traditionally associated with fluorescent lighting. There are two types of CFLs: integrated and non-integrated lamps.

  Integrated CFLs

Integrated lamps combine a bulb, an electronic ballast and either a screw or bayonet fitting in a single CFL unit. These lamps allow consumers to easily replace incandescent lamps with CFLs. Integrated CFLs work well in standard incandescent light fixtures. This lowers the cost of CFL use, since they can reuse the existing infrastructure. In addition, incandescent light fixtures are relatively inexpensive. For example, recessed lights (can lights) cost (in 2007) around $10 USD per can.

  Non-integrated CFLs

Non-integrated lamps allow for the replacement of consumable bulbs and the extended use of electrical ballasts in a light fixture. This fluorescent bulb itself does not include a ballast. Since the ballasts are placed in the light fixture they are larger and last longer, vis-a-vis the integrated ones. Non-integrated CFL housings can be both more expensive and sophisticated, providing options such as dimming, less flicker, faster starts, etc.^[6][7]

The ballasts make these light fixtures relatively expensive. They cost anywhere from $85 to $200 USD for each recessed can. If a ballast with dimming capabilities is desired the cost is anywhere from $125 to $300 per recessed can. Non-integrated CFLs are more popular for professional users, such as hotels and office buildings. However, the capabilities of these sophisticated external ballasts (e.g., faster starts, limited flicker, dimming, longer life spans, etc) are starting to appear in the integrated CFLs.

  CFL power sources

CFLs are produced for both alternating current (AC) and direct current (DC) input. DC CFLs are popular for use in recreational vehicles and off-the-grid housing. Poor families in developing countries are using DC CFLs (with car batteries and small solar panels) and/or wind generators, to replace kerosene lanterns.

CFLs can also be operated with solar powered street lights, using solar panels located on the top or sides of a pole and luminaires that are specially wired to use the lamps.

  Comparison with incandescent lamps

  Lifespan

Modern CFLs typically have a life span of between 6,000 and 15,000 hours, whereas incandescent lamps are usually manufactured to have a life span of 750 hours or 1000 hours^[8]. These lifetimes are quoted according to IEC60969^[9], which specifies that "life to 50% of failures shall be not less than value declared by the manufacturer." The lifetime of any lamp depends on many factors including manufacturing defects, exposure to voltage spikes, mechanical shock, frequency of cycling on and off and ambient operating temperature, among other factors.

The life of a CFL lamp is significantly shorter if it is only turned on for a few minutes at a time: In case of a 5 minute on/off cycle the lifespan of a CFL can be up to 85% shorter reducing its lifespan to the level of a normal lamp.^{[10] [11] [12]}

CFL lamps give less light later in their life than they did at the start. The light output depreciation is exponential, with the fastest losses being soon after the lamp was new. By the mid to end of their lives, CFLs can be expected to produce 70% to 80% of their original light output.^[13] This must be seen in the context that our eyes' response to light is logarithmic. A one f-number (or photographic 'f-stop') reduction represents a halving in actual light, but is subjectively quite a small change^[14]. A 20% to 30% reduction over many thousands of hours represents a change of about half an f-stop, which is barely noticeable in everyday life.^[15]

Energy consumption

Initial luminous flux (light output)	consumption of electricity
	Incandescent 240V	Compact fluorescent	Incandescent 120V	LV Halogen 12V
Lifetime	1,000hr	15,000hr	Variable	4,000hr
90 lm	15 W	-	-	-
240 lm	-	5 W	-	-
400 lm	-	7 W	-	-
415 lm	40 W	-	-	-
505 lm	-	-	40 W (1000hr)	-
660 lm	-	11 W	-	-
700 lm	60 W	-	-	-
865 lm	-	-	60 W (1000hr)	-
900 lm	-	14-15 W	-	35 W
930 lm	75 W	-	-	-
1190 lm	-	-	75 W (750hr)	-
1230 lm	-	20 W	-	-
1250 lm	-	-	-	50 W
1330 lm	100 W	-	-	-
1500 lm	-	23 W	-	-
1700 lm	-	-	-	65 W
1710 lm	-	-	100 W (750hr)	-
1900 lm	-	30 W	-	-
2140 lm	150 W	-	-	-
2990 lm	200 W	-	-	-
All 240V Incandescent,CFL and LV Halogen data taken from Osram website http://catalog.myosram.com at 2007-04-14. Lamps are: - "CLAS A FR xxW 240V B22D FS1" for incandescent - "DEL LL xxW/827 220-240V E27 FS1" for CFL, and - "64432 IRC xxW 12V GY6,35 FS1" for Low Voltage Halogen with the xx replaced by the various wattages. 240V lamps have slightly lower lumen outputs than 230V lamps, and the DEL LL variant of the CFLs are more efficient than the DEL EL variant. All 120V Incandescent data taken from GE Lighting website http://www.gelighting.com/na/business_lighting/products/ at 2007-04-14. Lamps are: - GE Basic A19 E26 120V xxW -with the xx replaced by the various wattages. 14 watt CFLs rated at 900 lumens by the manufacturer are: - n:vision EDXO-14 and - Commercial Electric EDS0-14.

For a given light output, CFLs use between one-fifth and one-quarter of the power of an equivalent incandescent lamp.^[16] For example, lighting accounted for approximately 9% of household electricity usage in the United States in 2001,^[17] so widespread use of CFLs could save most of this, for a total energy saving of about 7% from household usage.

  Interaction with other energy sources

All operating electrical lamps contribute heat to a building and therefore, when considering the energy savings of CFLs versus incandescent lamps, it is necessary to consider energy used for illumination as well as energy used for space heating or cooling.

If incandescent lamps are replaced by CFLs and all other factors are kept constant then the temperature inside any building will reduce. At times when the building requires both heating and lighting, the occupiers might then increase the space heating in order to bring the temperature back to a desired level. Depending on the source of this alternative heat compared to the local source of electricity, this may result in either a small increase or a small decrease in the total cost and environmental impact of changing to CFLs.

Conversely if the building requires both illumination and cooling, then CFLs will use less electricity themselves and will also reduce the load on the cooling system compared to incandescent lamps. This results in two concurrent savings, and since most air conditioners are also electrically powered, they are directly comparable.

There is a third case where electric lighting is used with natural ventilation and without either heating or cooling. In this case the energy savings due to CFLs are simpler to estimate, as described above.

When the energy used for both heating and lighting is considered, the use of CFLs saves three-quarters to four-fifths of lighting energy in temperate climates and ventilated buildings. More energy than this is saved in hot climates and cooled buildings, and less in cold climates and heated buildings.

Energy efficiency

For more details on this topic, see Luminous efficacy.

In order to compare the actual energy efficiency of CFLs with various other lamp technologies such as incandescent, LED and halogen, factors to compare include luminous , the efficiency subjective usefulness of different frequencies of light, the distribution of light over imaginary 360° spheres around the lamps and others. In round figures, typical incandescent lamps are around 2% efficient and domestic CFLs are currently 7%-8% efficient in usage (life cycle comparisons are necessarily more complex).

Cost

In addition to the above savings on energy costs, CFLs' average life is between 8 and 15 times that of incandescents.^[18] While the purchase price of a CFL is typically 3 to 10 times greater than that of an equivalent incandescent lamp, the extended lifetime and lower energy use will compensate for the higher initial cost in many applications.^[19]

CFLs can fail prematurely if overheated and so current recommendations for fully enclosed, unventilated light fixtures, such as those found recessed into some insulated ceilings, are either to use 'reflector CFLs' (R-CFL)^[20][21] or to replace such fixtures with those designed for normal CFLs.^[20]

Comparison with induction lamps

Similarly, as a fluorescent based lighting source, induction lighting has greater efficiencies per watt, higher powers than CFLs and a lifetime currently between 15,000 and 100,000 hours.^[22] By 2007, several manufacturers have already introduced dimmable induction lamps, making their application even more flexible and accommodating.

Currently, this type of light source is struggling with a high cost of production, stability of the products produced in China, establishing an internationally recognized standard and problems with EMC^[23] and RFI. Induction lighting is still excluded from Energy Star standard for 2007 by the EPA.

 

Comparison with LED lamps

While CFLs are an important development in energy conservation for most lighting, LED lighting has already filled a few specialist niches such as traffic lights and may have the potential to compete with CFLs in the near future. LED lamps have current efficiencies of 30% with higher levels attainable (recently up to 130 lm/w LED`s are available) , and a lifetime of around 50,000 hours, but currently are struggling to deliver the required intensity of light output for domestic uses while maintaining a reasonable working lifespan, at a reasonable cost.^[24][25][26]

  CFL availability

 

  Standard/Integrated CFLs

The U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) run the Energy Star program, which evaluates the energy efficiency of electrical components, including integrated CFLs. Those CFLs with a recent Energy Star certification start in less than one second and do not flicker. There is ongoing work in improving the "quality" (color-rendering index) of their light.

• Energy Star List of Compact Fluorescent Light Bulbs is a list of the thousands of Energy Star qualified CFLs.^[27] This list of lamps can be downloaded as an Excel file, which shows Lamp model, lumens, light quality (CSI), Watts, and test dates.
• List of Standard CFLs from Energy Federated Incorporated, most of which have ENERGY STAR certification.

  Dimmable CFLs

As of 2007, dimmable CFLs are an emerging category. Below are lists of CFLs that have this capability. The dimming range of CFLs is usually between 20 and 80 percent. By way of comparison Incandescent lamps have a 0 to 100 percent range.

• List of Reflector CFLs that work well in recessed lights. These lights tend to have a very high temperature environment, which used to shorten lamp life-span. This list has PNL and Energy Star certification.^[28] However, most of these Reflector CFL (R-CFL) lamps are not dimmable. Reflectors are recommended for recessed lights because they do not send light in all directions, they focus their light downward.
• List of Dimmable CFLs from the Environmental Defense Fund - most do not yet have Energy Star certification.
• List of Dimmable CFLs from Noli Control Systems (appear to be GreenLite CFLs), they claim they work on existing dimmer circuits, photocells, and timers, etc.
• List of Dimmable CFLs from "One Billion Bulbs" - most do not yet have Energy Star certification.

There is not much data yet on whether dimmable CFLs will work on standard incandescent dimmable circuits. There have been reports of limited range of dimming and buzzing. The Noli Control Systems claim that their CFLs work on standard incandescent circuits. On the other hand Leviton sells a dimmer designed to work specifically with Philip's dimmable CFLs.^[29]

In the UK, Varilight offer 20 Watt spiral T3 dimmable CFLs^[30] which operate with standard dimmers, with a dimming range between 2.46% and 100%. Colour temperature 2700 K, Energy Class A1, Power Factor Correction of 0.93, Colour Rendering Index of 81Ra and mercury content of 2.5 mg

In 2007 Omicron in the UK launched a range of fully dimmable CFL's which can operate with standard rotary or inline dimmers. Dimmable from 100% to 40% and available in 4 different shapes such as candles, and GLS.

  Colors

Color temperature can be indicated in kelvins or mireds (1 million divided by the color temperature in kelvins).

Color temperature	kelvin	mired
"Warm white" or "Soft white"	≤ 3000 K	≥ 333 M
"White"	3500 K	286 M
"Cool white"	4000 K	250 M
"Daylight"	≥ 5000 K	≤ 200 M

Color temperature is a quantitative measure. The higher the number in kelvins, the “cooler”, i.e., bluer, the shade. Color names associated with a particular color temperature are not standardized for modern CFLs and other triphosphor lamps like they were for the older-style halophosphate fluorescent lamps. Variations and inconsistencies exist among manufacturers. For example, Sylvania's Daylight CFLs have a color temperature of 3500 K, while most other lamps with a "daylight" label have color temperatures of at least 5000 K. Some vendors do not include the kelvin value on the package, but this is beginning to change now that the Energy Star Criteria for CFLs is expected to require such labeling in its 4.0 revision.

CFLs are also produced, less commonly, in other colors:

• Red, green, orange, blue, and pink, primarily for novelty purposes
• Blue for phototherapy
• Yellow, for outdoor lighting, because it does not attract insects
• Black light (UV light) for special effects

Black light CFLs, those with UVA generating phosphor, are much more efficient than incandescent black light lamps, since the amount of UV light that the filament of the incandescent lamp produces is only a fraction of the generated spectrum.

Being a gas discharge lamp, a CFL will not generate all frequencies of visible light; the actual color rendering index is a design compromise (see below). With less than perfect color rendering, CFLs can be unsatisfactory for inside lighting, but modern, high quality designs are proving acceptable for home use.

Other terms that apply to CFLs:

• Full Spectrum
• High Definition

Environmental issues

The examples and perspective in this article or section may not represent a worldwide view of the subject. Please improve this article or discuss the issue on the talk page.

Energy savings

Since CFLs use less power to supply the same amount of light as an incandescent lamp of the same lumen rating, they can be used to decrease energy consumption at the location in which they are used. In countries where electricity is largely produced from burning fossil fuels, the savings reduces emissions of greenhouse gases and other pollutants; in other countries the reduction may help reduce negative impacts from radioactive waste, hydroelectric plants, or other sources; see environmental concerns with electricity generation for details.

While CFLs require more energy in manufacturing than incandescent lamps, this is offset by the fact that they last longer.^[31]

Mercury emissions

CFLs, like all fluorescent lamps (e.g., long tubular lamps common in offices and kitchens), contain small amounts of mercury^[32][33] and it is a concern for landfills and waste incinerators where the mercury from lamps may be released and contribute to air and water pollution. In the USA, lighting manufacturer members of the National Electrical Manufacturers Association (NEMA) have made a voluntary commitment to cap the amount of mercury used in CFLs:

Under the voluntary commitment, effective April 15, 2007, NEMA members will cap the total mercury content in CFLs of less than 25 watts at 5 milligrams (mg) per unit. The total mercury content of CFLs that use 25 to 40 watts of electricity will be capped at 6 mg per unit.^[34]

Coal power plants are "the largest uncontrolled industrial source of mercury emissions in Canada".^[35] According to the Environmental Protection Agency (EPA), (when coal power is used) the mercury released from powering an incandescent lamp for five years exceeds the total of (a) the mercury released by powering a comparably luminous CFL for the same period and (b) the mercury contained in the lamp.^[36] It should be noted, however that the "EPA is implementing policies to reduce airborne mercury emissions. Under regulations issued in 2005, coal-fired power plants will need to reduce their emissions by 70 percent by 2018."^[37].

Some manufacturers such as Philips and GE make very low-mercury content CFLs.^[38] In 2007, Philips claimed its Master TL-D Alto range to have the lowest mercury content of any CFL on the market, at 2mg.^[39]

Safe disposal requires storing the bulbs unbroken until they can be processed. Consumers should seek advice from local authorities. Usually, one can either:

• Return used CFLs to where they were purchased, so the store can recycle them correctly; or
• Take used CFLs to a local recycling facility.

The United States Environmental Protection Agency publishes guidelines on how to clean up after CFL tube ('bulb') breakage ^[40] and recommends that, in the absence of local guideline, CFLs be double-bagged in plastic bags before disposal.

The first step of processing CFLs involves crushing the bulbs in a machine that uses negative pressure ventilation and a mercury-absorbing filter or cold trap to contain and treat the contaminated gases. Many municipalities are purchasing such machines. The crushed glass and metal is stored in drums, ready for shipping to recycling factories.

According to the Northwest Compact Fluorescent Lamp Recycling Project, because household users have the option of disposing of these products in the same way they dispose of other solid waste, "a large majority of household CFLs are going to municipal solid waste". They additionally note that an EPA report on mercury emissions from fluorescent tube lamp disposal indicates the percentage of total mercury released from the following disposal options: municipal waste landfill 3.2%, recycling 3%, municipal waste incineration 17.55% and hazardous waste disposal 0.2%.^[41].

How they work

Parts

There are two main parts in a CFL: the gas-filled tube (also called bulb or burner) and the magnetic or electronic ballast. Electrical energy in the form of an electrical current from the ballast flows through the gas, causing it to emit ultraviolet light. The ultraviolet light then excites a white phosphor coating on the inside of the tube. This coating emits visible light. CFLs that flicker when they start have magnetic ballasts; CFLs with electronic ballasts are now much more common. See Fluorescent lamp.

End of life

Both the ballast and the burner (tube) are subject to failure from normal use. A detailed description of the failure modes of fluorescent lamps is given in the Fluorescent lamp article.

At end of life, CFLs should be recycled by specialist firms. In the European Union, CFL lamps are one of many products subject to the WEEE recycling scheme. The retail price includes an amount to pay for recycling, and manufacturers and importers have an obligation to collect and recycle CFLs.

Many territories do provide recycling facilities for fluorescent lamps. However, many CFLs are crushed in landfills, exposing air and water to mercury vapor.

Design issues

Apart from durability, the primary purpose of good CFL design is high electrical efficiency.

These are some other areas of interest:

• Quality of light: A phosphor emits light in a narrow frequency range, unlike an incandescent filament, which emits the full spectrum, though not all colors equally, of visible light. Mono-phosphor lamps emit poor quality light; colors look bad and inaccurate. The solution is to mix different phosphors, each emitting a different range of light. Properly mixed, a good approximation of daylight or incandescent light can be reached. However, every extra phosphor added to the coating mix causes a loss of efficiency and increased cost. Good-quality consumer CFLs use three or four phosphors—typically emitting light in the red, green and blue spectra—to achieve a "white" light with color-rendering indices (CRI) of around 80 although CFLs with a CRI as great as 96 have been developed. (A CRI of 100 represents the most accurate reproduction of all colors; reference sources having a CRI of 100, such as the sun and incandescent tungsten lamps, emit black body radiation.)
• Size: CFL light output is roughly proportional to phosphor surface area, and high output CFLs are often larger than their incandescent equivalents. This means that the CFL may not fit well in existing light fixtures.
• Electronics: Dimming control can be added to the lamp with support from the driver electronics; only CFLs designed for use in such lighting fixtures should be used.^[42] According to BC Hydro^[43] and Environmental Defense^[44], new dimmable screw-in fluorescent lamps are now available, although these models only dim to a certain percentage such as 10 or 20 percent before turning off completely. Westinghouse claims to have released a dimmer that can dim non-dimmable CFLs.^[45]
• Heat: Higher luminosity CFLs, such as those designed to replace 100W GLS lamps, get warm in operation. As a result, many such CFLs are recommended not to be run with the electronics/ballast above the bulb/tube, as the heat generated will significantly shorten the ballast's service lifetime. This makes such CFLs unsuitable for use in pendant lamps and especially unsuitable for recessed lighting fixtures. CFLs intended for use in such fixtures are available.
• Large deployments of CFLs require specialized electronics with low levels of electronic distortion to avoid disturbing the electricity supply.^[46] This is usually not a problem with home use because of the few lamps deployed per site.
• Time to achieve full brightness: Compact fluorescent lamps may provide as little as 50-80% of their rated light output at initial switch on^[47] and can take up to three minutes to warm up, and color cast may be slightly different immediately after being turned on^[48]. This compares to around 0.1 seconds for incandescent lamps and around 0.01 seconds for LED lamps.^[49]). In practice this varies between brands/types. It is more of a problem with older lamps, "Warm (color) tone" lamps and at low ambient temperatures.
• Outdoor Use: CFLs that are not designed for outdoor use may perform poorly in cold weather; CFLs are available with cold-weather ballasts, which may be rated to as low as -23 degrees Celsius (-10 F).^[50] Standard compact fluorescents may fail to operate at low temperatures. Light output drops at low temperatures. But the new CFL's can be used to temperatures below -5°F (-20.5°C) .^[51]
• Differences among manufacturers: There are large differences among quality of light, cost, and turn-on time among different manufacturers, even for lamps that appear identical and have the same color temperature.
• CFLs generally get dimmer over their lifetime^[52], so what starts out as an adequate luminosity may become inadequate. In one test by the U.S. Department of Energy of "Energy Star®" products in 2003-4, one-quarter of tested CFLs no longer met their rated output after 40% of their rated service life.^[53][54]
• Hum: Despite the newer electronics that are marketed to be silent, some compact fluorescents still hum.^{[citation needed]}

Other CFL technologies

Another type of fluorescent lamp is the electrodeless fluorescent, known as a radiofluorescent lamp or fluorescent induction lamp. Unlike virtually all other conventional lamps that have hardwired electrical connections to transfer energy to the lamp core, the electrodeless fluorescent accomplishes this solely by electromagnetic induction. The induction is effected by means of a wire-wound ferrite core that projects upward into the bulb encased in an inverted U-shaped glass cover. The wire is energized with high frequency electricity often 2.65 or 13.6 MHz; this ionizes the mercury vapor, exciting the phosphor and producing light.

Another variation on existing CFL technologies are bulbs with an external nano-particle coating of titanium dioxide. Titanium dioxide is a photocatalyst, becoming ionized when exposed to UV light produced by the CFL. It is thereby capable of converting oxygen to ozone and water to hydroxyl radicals, which neutralize odors and kill bacteria, viruses, and mold spores.

The Cold Cathode Fluorescent Light (CCFL) is one of the newest forms of CFL. CCFLs use electrodes without a filament. The voltage of CCFL lamps is about 5 times higher than CFL lamps and the current is about 10 times lower. CCFL lamps have a diameter of about 3 millimeters. The lifetime of CCFL lamps is about 50,000 hours. The lumens-per-watt value is about half of CFL lamps.

Initially CCFL was used for thin monitors and backlighting, but now it is also manufactured for use as a lamp. The efficacy (lumen/watt) is actually lower than a compact fluorescent light. Its advantages are that it (1) is instant-on, like an incandescent, (2) is compatible with timers, photocells, and dimmers, and (3) has an amazingly long life of approximately 50,000 hours. CCFL are a convenient transition-technology for those who are not comfortable with the short lag-time associated with the initial lighting of Compact Fluorescents. They are also an effective and efficient replacement for lighting that is turned on and off frequently with little extended use (e.g. a bathroom or closet).

Efforts to encourage adoption

Due to the potential to reduce electric consumption and hence pollution, various organizations have undertaken measures to encourage the adoption of CFLs, with efforts ranging from publicity to encourage awareness and make CFLs more widely available to direct measures to provide CFLs to the public. Some electric utilities and local governments have subsidized CFLs or provided them free to customers as a means of reducing electric demand (and thereby delaying additional investments in generation).

More controversially, some governments are considering stronger measures to encourage adoption of CFLs or even entirely displace incandescents; some proposed efforts involve tax measures, but Australia has announced a plan to phase out the use of incandescent lamps by 2010. Canada has also committed to phasing out incandescent lamps starting in 2012.

Voluntary measures

Home Depot gave away 1,000,000 CFLs on Earth Day 2007.

IKEA in the U.K gave 6 free CFLs to staff, and will replace them free when they run out in a 'bulb for life' campaign as part of World Environment Day.

Wal-Mart announced in September 2006 that it was starting a campaign to endorse CFLs. The store aims to sell one CFL to every one of their 100 million customers within the next year.^[55].

In Ottawa, Canada, there is an effort to get every household to change at least one lamp. Project Porchlight went door-to-door to provide one CFL to every household for free. More than 225,000 bulbs were delivered in 2005 and 2006. Project Porchlight is undertaking similar campaigns in the provinces of Alberta and Ontario and in the Yukon Territory in 2007.

In other locations in Canada, local utilities regularly undertake "energy audits" to customers to suggest ways to reduce consumption (and reducing investment requirements for the utilities); CFLs are often given away or provided at subsidized prices to raise awareness of the potential savings.

The Ontario Power Authority has a voluntary program providing immediate cash rebates via coupons for the purchase of CFLs. The campaign is driven by posters, ads and their website Every Kilowatt Counts.

The U.S. Environmental Defense initiated a campaign in June 2006 called Make the Switch to encourage the public to switch from incandescent lamps to compact fluorescent lamps. It asked every household in the U.S. to replace three 60-watt incandescent lamps with CFLs. Environmental Defense claims that if every household were to do this, the change could reduce pollution as much as taking 3.5 million cars off the road. In the Netherlands, Greenpeace are attempting to mobilize people to Change 1 million light bulbs to CFLs.

In February 2007, the 18seconds campaign was launched with leaders from business (Yahoo! and Walmart) and US Government (EPA and DOE) to increase awareness of energy-efficient lamps as a way to slow global climate change . The coalition was named 18seconds to reflect the amount of time it takes for one person to change a lamp. To coincide with the launch of this campaign, Yahoo has created a Web site 18seconds.org that will track lamp sales and energy savings nationwide and encourage lamp-switching competition among cities and states.^[56]

In South Africa the main electricity supply company Eskom has launched a program to exchange incandescent lamps for CFLs for free. Its aim is to reduce the electrical demand at peak times. [13]

Another website, Onebillionbulbs.com, is behind a campaign to replace one billion incandescent lamps with CFLs across the U.S. The site has a fifty-state map; each state is a certain color from white to green. The closer to green, the closer to the state's goal.

Recognizing that lower income households are less likely to lay out the significantly greater retail price for compact fluorescent lamps, which can cost 5 to 6 times the cost of an incandescent lamp, the non-profit organization Wattsaver [14] is accepting donations that will be used to give compact fluorescent lamps to these lower income households.

In New Zealand an organisation called Energy Mad^[57] was established in 2004. Energy Mad is promoting CFL adoption with a target of introducing five of their branded ecobulbs^[58] into 55% of New Zealand homes ^[59]. They are using various promotions with retailers and discount coupons to attempt to achieve this. By utilising these vouchers you give Energy Mad the carbon credits due to the implied replacement of your incandescent lamp with the CFL ^[60].

In October 2007 electro-distribution companies in Slovenia will give away 800.000 21W Osram CFL light bulbs (one to every household in Slovenia). Project initiator is Slovenian powerplant holding - HSE Group.[15]

Government efforts to encourage adoption of CFLs

   Australia

On February 20, 2007, the Federal Government announced that by 2010, incandescent light bulbs would be banned in Australia. It is estimated that greenhouse gas emissions will be cut by 800,000 tonnes (Australia's current emission total is 564.7 million tonnes), a saving of approximate 0.14%. This make Australia apparently the first government to do so in the world.^[61][62] The Government has not announced any concurrent recycling program for old incandescent lamps.^[63] The South Australian government has published an energy saving calculator in order to help people calculate their individual benefits.

 

   Belgium

The Environment Minister Bruno Tobback is intent on banning incandescent light-bulbs, and thinks the ban on incandescent light-bulbs should be included in the list of measures under the Kyoto Protocol.^[64][65] Former energy Minister Kris Peeters supports this position as well.^[66]

 

   Canada

On 2007-04-18, the Ontario government's Minister of Energy Dwight Duncan announced that it was planning to ban the sale of incandescent lamps in 2012 to cut the local energy consumption.^[67][68]

The Ontario Power Authority has a voluntary program providing immediate cash rebates via coupons for the purchase of CFLs. The campaign is driven by posters, ads and their website Every Kilowatt Counts.

Following the announcement, the fellow province of Nova Scotia has also pondered a similar ban.^[69] However, Energy Minister Bill Dooks said he expects it would be four or five years before a ban is in place.

The territory of Nunavut is planning to ban incandescent lamps in May 2007.^[70]

Hydro-Quebec offers mail in rebates for many energy star appliances including the fluorescent lamp. They have a vigorous advertising campaign that includes radio, television and bus shelter billboard advertisements. They are currently offering up to $25 in mail in rebates for their customers who buy the bulbs.^[71]

A week later, on 2007-04-25, the federal government's Environment Minister John Baird announced plans to ban the sale of incandescent lamps by 2012 all over Canada. According to the minister, Canada will save CA$3-4 billion over the lifetime of the new bulbs^{[72] [73]}

European Union

The European Union has proposed a ban on incandescent light bulbs, planned to come into effect in the near future, but this will not affect existing incandescent bulbs, only the production of new bulbs.^[74] However, the proposal has yet to be approved by all member states or the European Parliament.

   Finland

On the 26 September 2007, Swedish People's Party MP Christina Gestrin, has posted a bill through the Eduskunta for banning incandescent light bulbs in Finland by 2011. It is estimated that the ban would save Finland around to 200,000 tonnes on carbon dioxide emissions.^[75]

 Germany

Germany’s Environment Minister Sigmar Gabriel has urged the European Commission to ban inefficient light bulbs in the EU in the fight against global warming. The EU could reduce carbon dioxide emissions by 25 million tonnes a year if energy saving light bulbs such as CFLs were used in both the domestic and services sectors. .^[76]

Netherlands

The Netherlands is moving ahead with plans to ban incandescent light bulbs as well. The Environment minister Jacqueline Cramer wants a ban on incandescent light-bulbs by 2011. ^[77]

New Zealand

In response to the Australian ban, New Zealand is considering similar measures. Climate Change Minister David Parker said: "The Australians are talking about looking at banning ordinary lightbulbs in three years' time...I think by the time that is implemented in Australia - if it is - we will be doing something very similar".^[78]

Pakistan

During the year 2007 during the summer season when energy demand is at its peak,Government of Pakistan repeatedly requested public to use flurescent lamps(commonly known as energy savers in Pakistan). There were talks of making fluorescent lamps avilable on subsidised rates[16].

   United Kingdom

In the UK, Dr Matt Prescott of Banthebulb.org first proposed a ban in Feb 2005 and has since lobbied Parliament to tax, phase out and ban domestic incandescent lamps, a measure that has generated controversy. Recently, the light bulb manufacturer Philips has also set up a website called aSimpleSwitch.com in support of a ban of high energy incandescent light bulb, but the continued use of high efficiency incandescents and halogens; other commentators oppose any proposed ban.^[79] The Government itself focuses its efforts to improve household energy efficiency through its establishment and funding of the Energy Saving Trust.

The Co-op have also stopped selling incandescent lamps in 50 pilot stores, with a view to withdrawing them completely in the future. They have also reduced the prices of their CFLs to make them more attractive in the short term.^[80]

On the 27 September 2007, the government announced plans to phase out the sale of incandescent light bulbs by 2011. Retailers will not replace 150 watt bulbs from January 2008, 100 watt bulbs from January 2009, 40 watt bulbs in 2010, and all remaining high power bulbs by 2011. These plans are voluntary, however they have wide support from retailers such as Currys, Habitat, Woolworths, Co-op, Asda, Morrisons, Sainsbury's and Tesco. This initiative has been criticised by environmental groups such as Greenpeace, and other political parties, who think mandatory measures should be introduced.

   United States of America

In January 2007, California State Assembly member Lloyd E. Levine (D-Van Nuys) announced that he would introduce the "How Many Legislators does it take to Change a Light Bulb Act" (a reference to light bulb joke), which would ban the sale of incandescent light bulbs in California starting in 2012.^[81] That bill is now dead, though a competing bill by California State Assembly member Jared Huffman (D-Santa Rosa) is still active.^[82]

A few days later, Connecticut state Representative Mary M. Mushinsky (D-Wallingford) proposed a similar ban for the state of Connecticut.^[83][84]

On February 8 2007, New Jersey Assemblyman Larry Chatzidakis introduced a bill that calls for the state to switch to fluorescent lighting in government buildings over the next three years. "The light bulb was invented a long time ago and a lot of things have changed since then," said Chatzidakis. "I obviously respect the memory of Thomas Edison, but what we're looking at here is using less energy.^[85]

On October 1, 2007, West Virginia Governor Joe Manchin named October 1 "Change a Light, Change the World Day," while giving a speech at West Virginia University. The university on the same day launched a massive program called WECAN, or West Virginia University Conservation Awareness Now. On launch day, there was a light bulb exchange in conjunction with Osram Sylvania at the university student union giving a compact fluorescent bulb for each regular incandescent bulb turned in.^[86]

Gallery of CFLs

Biax or Linear CFL	Globe CFL	Reflector CFL	Spiral CFL
A CFL designed to resemble an incandescent bulb. An incandescent bulb is shown on the right for comparison.	Detail of a spiral CFL	A 40W E12-base CFL (left), next to an equivalent incandescent bulb (right).	8 W E27 type for 220..240 Volts